Futaba 7PX 7-Channel T-FHSS Super Response System

Tower Stock# LXGTNB  •  Manufacturer Stock# FUTK4908
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Futaba 7PX 2.4GHz T-FHSS Super Response 7-Channel Surface System
with the R334SBS 4-Channel Diversity Receiver.

FEATURES

T-FHSS SR Super Response, T-FHSS, S-FHSS and FASST protocols
Large, backlit 4.3" LCD touch screen
S.Bus servo programming editor
4WS, brake, gyro, and steering mixing
Channels 5/6 and 7 feature reversing, end point adjustments, sub-trim
assignable brake mixing and ABS
Assignable switch/dial functions
5 programmable mixes
40 model memory
Servo monitor
Software-updateable
Up/down/integral timer
Lap timer/memory
Voice message/audio earphone jack (3.5mm stereo jack plug)
Right or left hand operation
Micro memory card slot
Wheel/trigger (tension, position, angle) adjustments
R334SBS receiver includes normal/high-speed mode auto-detection,
battery fail safe, 3.7 - 7.4V operation and T-FHSS SR/T-FHSS
2.4GHz system operating protocol
One year limited warranty through Hobby Services beginning at date
of purchase

INCLUDES

Futaba 7PX Transmitter
R334SBS 4-Channel Diversity Receiver, FUTL7688
Angle Spacer for Wheel
32 Wheel Adapter
Narrow Type Trigger Brake Lever
Miniature Screwdriver
Screen Protector
Instruction Manual

REQUIREMENTS

Transmitter battery such as the Futaba NT5F1800B NiMH 6V NiMH TX
Battery, FUTM1482 or the LiFeSource 6.6V 1900mAh TX Battery,
HCAM6521 (dry cell battery box is only for radio performance
checks, do not use AA cells to operate vehicles)
Servos of modeler's choice

SPECIFICATIONS

Transmitter;
Transmitting Frequency: 2.4GHz band
Transmitting RF Power Output: 100mW EIRP
Operating Protocol: Futaba T-FHSS SR/T-FHSS/S-FHSS/FASST-C2
Power Requirement: Futaba NT5F1800B NiMH 6V NiMH FUTM1482, or the
Hobbico LiFeSource 6.6V 1900mAh TX Battery, HCAM6521
Current Drain: 350mA or less when the T-FHSS Vibration off,
backlighting on
Transmitting Antenna: 1/2 dipole
Touch Panel: 4.3" (109mm) backlit color TFT (thin film transistor)
liquid crystal touch panel

R334SBS Receiver;
Protocol: T-FHSS SR/T-FHSS 2.4GHz System
Operating Voltage: 3.7 - 7.4V
Mode: Normal/High-speed mode auto detection
Dimensions: 1.33 x 0.88 x 0.44" (33.9 x 22.3 x 11.3mm)
Weight: 0.26oz (7.3g)

COMMENTS

In addition to the included R334SBS Receiver, the following Futaba
receivers are compatible with the 7PX;
T-FHSS R324SBS, R304SB, R304SB-E (telemetry supported)
S-FHSS R203GF, R204GF-E, R2104GF, R2008SB, R2006GS, R2001SB,
R2106GF
FASST R614FS, R614FF-E

jxs 05/15/17
ir/jxs

Resources
Parts Compatibility
Easy RC: Radio Systems
Industry Review #1
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info