Hacker Model MXS-804 Vector EPP Foam EP ARF 31.7" Red

Tower Stock# LXGDYX  •  Manufacturer Stock# HKPA0045
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 4 (see larger view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Almost Ready to Fly MXS-804 Vector Aerobatic Airplane
from Hacker-Model.
For Intermediate to Advanced level flyers.


Construction: CNC machined EPP (Expanded Polypropylene), repairable
with CA glue, CAD painting process for high degree of scale detail
Wing: One-piece with large aileron area and side force generators
Aileron Control: Single servo
Landing Gear: Wire, foam wheel pants, 1.2" (31mm) diameter, hard
plastic wheels
Pushrods and Struts:
Motor Mount: Fiberglass


ARF MXS-804 Vector with Motor Mount and Instruction Manual


Radio: 4-ch with V-mix capability
Servos: 9-12g for ailerons, 6g for elevator and rudder
Servo Extensions: Two, at least 14-16" for elevator & rudder servos
Motor: Outrunner brushless, IMPORTANT; if using other motors than
those recommended by Hacker, different holes must be drilled in the
firewall for proper installation
Electronic Speed Control: Compatible with selected motor
Propeller: 8x4 for 2S battery, 7x3 for 3S
LiPo Battery: 2S at least 450mAh, or 3S at least 350mAh
Battery Charger: Compatible with selected battery
LiPo Charging Bag and Field equipment


Wingspan: 31.7" (804mm)
Length: 33.9" (860mm)
Weight: 7.4oz (210g)
Center of Gravity (CG): 7.7-8.1" (195-205mm) back from center
point of leading edge of wing halves
Control Throws- Basic Aerobatic Extreme
Ailerons 30% 40% 45%
Elevator 30% 40% 45%
Rudder 30% 40% 45%

jxs 09/30/16

Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Industry Review #2
Manufacturer Mailing Address
Additional Manufacturer Contact Info