Hacker Model Shake Indoor F3P EPP Foam ARF 33"

Tower Stock# LXGDYU  •  Manufacturer Stock# HKPA0015
  • front/side (see larger view)
  • rear/side (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Electric Powered, Radio Controlled
Almost Ready to Fly Shake Indoor Aerobatic Airplane from Hacker.
Precision Indoor Aerobatic Flying F3P Category


Construction: EPP foam
Aileron Control: Dual servo
Landing Gear: Carbon


ARF Shake Aerobatic Indoor Airplane with Motor Mount, Wheel Pants,
Landing Gear, Pushrods and Hardware


Radio: 4-channel with four micro 5-6g servos (two-aileron, one-rudder
Motor: Outrunner brushless, IMPORTANT; if using other motors than
those recommended by Hacker, different holes must be drilled in the
firewall for proper installation
ESC: To match selected motor
Propeller: 8x4 slow flyer
LiPo: 2S, at least 240mAh
Thin CA glue, activator, basic tools


Wingspan: 33.1" (840mm)
Length: 36.2" (920mm)
Weight: 4.76oz (135g)
Control Throws- Basic Aerobatic
Elevator, up & down: 30 30% exp 45 40% exp
Rudder, right & left: 30 30% exp 40 40% exp
Ailerons, up & down: 30 30% exp 40 40% exp
Center of Gravity (CG): 9.2" (235mm) back from front of fuselage

jxs 07/28/16

Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info