ARRMA 1/8 RAIDER XL BLX Brushless Desert Buggy 2WD RTR

Tower Stock# LXGCEE**  •  Manufacturer Stock# ARAD87**
  • Thumbnail 1 (see larger view)
  • Thumbnail 5 (see larger view)
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). Exposure through skin contact and ingestion may occur.
Color Availability
Money Saving Combos
Money Saving Combos
Notes from our tech department:
This is the Arrma Brushless Electric Powered, 2.4GHz Radio Controlled
1/8 scale RTR Raider XL BLX Desert Buggy without Battery.


Chassis: Alloy front chassis plate, batteries fit under chassis-no
need to remove body to change batteries, quick release battery
Drive: Rear wheel with steel driveshafts and axles
Motor: 4-pole 3800kV brushless, 540 size
Motor Mount: Composite
Motor and ESC: Arrma BLX85 brushless power system with 60A ESC,
4-pole 3800Kv 540 size brushless motor
Radio: Tactic TTX300 with TR326 3-Channel SLT HV receiver
Steering Servo: Arrma ADS-7M, 97 oz/in (7 kg/cm) torque @ 7.2V,
waterproof and dustproof, dual ball bearings and metal gears
Receiver Box: Waterproof and dust proof
Body: Trimmed and painted polycarbonate body, black plastic wing
Transmission: Composite gears, brushless ready
Slipper Clutch: Adjustable for different track conditions
Suspension: Fully independent
Differential: Internal metal gears, oil filled, molded diff gear
withstands being run on 3S LiPo batteries
Shocks: Composite body oil-filled
Tires: dBoots, aggressive off-road pattern with hard wearing foam
Wheels: Six spoke with black chrome finish
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Steering: Bellcrank type with servo saver
Warranty: Two year limited beginning at date of purchase


RTR Raider XL BLX Buggy with Painted Body and 2.4GHz Radio, ESC,
Steering Servo, Brushless Motor, Tires, Wheels, Foam Inserts,
Instruction Manual


AA Batteries: Four for transmitter
Battery: 2S or 3S LiPo battery or 6 or 7 cell NiMH stick pack
Battery Charger: For selected battery
Track and maintenance equipment


Length: 18.31" (465mm)
Front Width: 11.42" (290mm)
Rear Width: 11.81" (300mm)
Height: 6.06" (154mm)
Wheelbase: 12.99" (330mm)
Weight: 3lbs 15oz (1.79kg) without battery
Maximum Battery Dimensions: 7.87 x 1.89 x 1.06" (200 x 48 x 27mm)
Length: 11.3" (287mm)
Width: 5.7" (146mm)
Height: 3.0" (75mm)


For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 15x21mm F&R Inner Hubs 1 ARAC3162
2 8x16mm F&R Inner Hubs 1 ARAC3156
2 5x10mm Idler Gear 1 ARAC3200
2 5x10mm Input Shaft 1 ARAC3200
2 10x15mm Diff Gear 1 ARAC3202

jxs 09/30/16

Easy RC: Cars & Trucks
Industry Review #1
Industry Review #2
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info