Traxxas 1/10 Slash Ford F-150 Raptor SVT OBA RTR

Tower Stock# LXFNYW**  •  Manufacturer Stock# 58064-2
Traxxas 1/10 Slash Ford F-150 Raptor SVT OBA RTR (large view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the electric powered, 2.4GHz TQ radio controlled, 1/10 scale RTR
Slash All Terrain Truck from Traxxas with the F-150 Raptor SVT Body,
On-Board Audio System,
iD equipped Charger and 8.4V iD equipped battery.

**The included TQ 2.4GHz radio system is compatible only with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FEATURES

Audio System: OBA On-Board Audio uses sound sampled from full-size
Traxxas Team trucks, adjustable from stealth mode to wide open,
sounds respond to throttle input from transmitter, audio shuts off
if truck is stopped for more than 10 seconds, tap throttle on
transmitter to here engine fire back up, use rocker switch on
transmitter to shift to "neutral" and hear the engine revving,
OBA uses a minimal amount of power from battery, so run time is not
shortened
Chassis: Modified tub, constructed of nylon with chassis nerf bars
and newly designed body mounts with reinforced washers to better
support the body during jumps and high speed runs
Drive: Rear wheel, with heavy-duty drive yokes and telescopic
driveshafts for increased suspension travel
Motor: Titan 550 12T brushed
Radio: Traxxas TQ 2.4GHz
Steering Servo: Digital high-torque, waterproof
Electronic Speed Control: Traxxas XL-5 waterproof, with reverse,
training mode and one-button setup
Ball Bearings: Full set, rubber sealed
Battery: Traxxas Power Cell 3000mAh 7-cell 8.4V NiMH w/iD Auto
Battery Identification that allows Traxxas iD equipped chargers to
automatically set and optimize charge settings
Battery Charger: iD equipped 4A DC powered peak detecting NiMH
Suspension: Adjustable, heavy duty steel turnbuckles and captured rod
ends for high degree of durability
Shocks: Oil-filled Ultra, fully tunable and rebuildable
Body: ProGraphix trimmed and painted Ford F-150 SVT Raptor
Transmission: Magnum 272 with metal gears and Revo-spec torque-
control slipper clutch and sealed gearbox
Differential: Planetary steel gears
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Wheels: Satin-finish 2.2" Slash wheels
Tires: 2.2" (56mm) BF Goodrich Mud Terrain
Steering: Bellcrank type with servo saver

INCLUDES

1/10 scale 2wd RTR Slash Truck with painted F-150 Raptor SVT Body,
2.4GHz Radio, ESC, Brushed Motor, 7-cell Battery, Charger, 23 tooth
Pinion Gear, On-Board Audio and Instruction Manual

REQUIREMENTS

AA Batteries: Four AA cells
Building and track equipment

SPECIFICATIONS

Vehicle;
Length: 22.36" (568mm)
Height: 8.4" (214mm)
Wheelbase: 13.2" (335mm)
Ground Clearance: 3.5" (89mm)
Track: 11.65" (296mm) distance from outer edges of tires side-to-
side
Weight: 4.76oz (2.16kg)
Internal Gear Ratio: 2.72 (final drive 12.58)
Body:
Length: 21.7" (551mm)
Width: 11.9" (302mm)
Height: 5.6" (143mm)

COMMENTS

The Slash F-150 Raptor is available in the following body colors;
Blue, TRAD01BB Red, TRAD01RR
Black, TRAD01LL White, TRAD01WW

The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
affordable upgrade for this vehicle.

The ball bearings in the Traxxas Slash 2WD are rubber sealed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed alternatives from Duratrax;
Qty. Size Location Qty Bearing Set Qty Bearing Set
4 5x11mm Steering Blocks 2 DTXC1547 2 TRAC5116
4 5x8mm Bellcrank 1 DTXC1523 2 TRAC6728
4 5x11mm R Stub Axles 2 DTXC1547 2 TRAC5116
1 5x11mm Spur Gear 1 DTXC1547 1 TRAC5116
4 5x11mm Transmission 2 DTXC1547 2 TRAC5116

jxs 08/10/15
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info