ARRMA 1/10 Senton 6S BLX Brushless 4WD SC Truck RTR

Tower Stock# LXEPDF**  •  Manufacturer Stock# ARAD83**
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). Exposure through skin contact and ingestion may occur.
Coupon discount not allowed by manufacturer for this product
Tech Notices:Notice 1 Notice 2
Money Saving Combos
Money Saving Combos
 
LZ1601**
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 2.4GHz Radio Controlled, Brushless Powered
1/10 scale Ready to Run Senton 6S BLX Short Course Truck from Arrma.
For Modelers 14 Years of Age and Older.

The version of the Senton 6S BLX released in October 2017
(ARAD83LG) features the following differences and upgrades;

**New Larger Battery Tray w/Wire Routing Clip & area for Balance Plug***
**Radio Box w/Rubber Wire Seals & Receiver Plate**
**Larger Diameter 0.16" (4mm) Shock Caps & New High Spring Perches**
**Additional Webbing Added to Bulkheads for Greater Strength**
**Stronger Servo Mount for Better Steering Feel**
**Updated Chassis Braces Attach Directly to Chassis**
**Lightweight Plastic Shock and Roll Bar Pivot Balls**
**Added Material Around Front Suspension Arms for Greater Strength**

FEATURES

Chassis: 0.12" (3mm) thick aluminum, with side impact bumpers
Drive: Four wheel with CVD driveshafts
Radio: Tactic TTX300 3-channel with user programmable 3rd channel,
steering rate adjustment, steering and throttle trim & end point
adjustments, 3-channel TR326 high voltage (7.4V) micro receiver
with failsafe, 70/30 throttle setting
Steering Servo: ADS-15M metal geared with 208 oz/in torque,
.12 sec @ 60 transit speed
Motor: 2050kV brushless
ESC: Arrma BLX185 150A
Shocks: Aluminum body, oil filled, big bore, plastic top and bottom
caps and preload adjusters
Shock Towers: 0.20" (5mm) thick aluminum
Suspension: Reinforced hangers with inboard hinge pins that are less
likely to pop out
Body: Trimmed and painted
Motor Mount: Aluminum
Gearboxes: Fully sealed
Tires: dboots Sidewinder 2, 1.7" (44mm) wide, 4.2" (108mm) diameter
2.2"/3" mounting bead
Wheels: Plastic construction, black in color, 2.2" (56mm) outer
diameter, 1.6" (41.5mm) wide, 17mm hex
Pinion Gear: Steel construction 12T Mod 1
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Warranty: Two year limited warranty beginning at date of purchase

INCLUDES

RTR Senton 6S BLX Short Course Truck with 2.4GHz Radio, Brushless
Motor, ESC, Painted Body, Instruction Manual

REQUIREMENTS

AA Batteries: Four for transmitter
LiPo Battery: Two 2-3S 5000mAh 35C minimum LiPo with XT90
connector, Duratrax 11.1V 5000mAh 35C batteries (DTXC1969)
recommended, or one 4-6S LiPo battery
Battery Charger: To match selected battery
LiPo charging sack, building & track equipment

SPECIFICATIONS

Vehicle-
Length: 22" (560mm)
Width: 11.6" (295mm)
Height: 7.67" (195mm)
Wheelbase: 12.5-12.67" (318-322mm)
Weight: 127oz (3.6kg)
Final Gear Ratio: 11.79
Pinion and Spur Gear Pitch: 1M
Maximum Battery Dimensions: 6.22 x 2.76 x 1.89" (158 x 70 x 48mm)
Body-
Length: 21.7" (552mm)
Width: 9.5" (242mm) behind front wheels, narrowest point
12.4" (315mm) at rear wheels, widest point
Height 5.5" (140mm)

COMMENTS

The Senton 6S BLX Short Course Truck is available in the following
color scheme, Green/Black, ARAD83GL.

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 15x21mm Fr Uprights 1 ARAC3162
2 8x16mm Fr Uprights 1 ARAC3156
2 15x21mm Rear Uprights 1 ARAC3162
2 8x16mm Rear Uprights 1 ARAC3156
1 8x19mm Fr Input Gear 1 ARAC3159
1 8x19mm Ctr Input Gear 1 ARAC3159
1 8x16mm Fr Diff 1 ARAC3156
1 8x16mm Rear Diff 1 ARAC3156
1 5x11mm Rear Gearbox 1 ARAC3150

The BLX185 ESC was set from factory to default to a LiPo battery
mode.
If any adjustments such as recalibration were made, check to see
that the battery mode has not been inadvertently set to NiMH mode.
Follow these steps to verify battery mode;
1. Raise the vehicle chassis so that the wheels are not touching
anything.
2. With the battery or batteries charged and connected to the
vehicle's ESC leads, switch on the transmitter and then switch
on the vehicle. If a green LED flashes once the ESC is in LiPo
mode. If there is no LED flash on the ESC, and a pulsing noise
is made by the motor, the ESC is in NiMH mode. If you intend to
use LiPo batteries DO NOT operate ESC in NiMH mode, the
batteries may be damaged.

To switch ESC from NiMH mode to LiPo mode perform the following
steps;
1. Connect battery, switch on transmitter, press and hold set
button and turn on ESC. The red LED will flash.
2. Keep holding set button until green LED flashes. The number of
flashes represents the variable number of attributes being
programmed.
3. To enter the battery mode programming function, release the set
button when one green LED flashes.
4. Press the set button to change battery mode between LiPo and
NiMH. One RED LED flash indicates ESC is set to LiPo mode.
5. To save setting, switch ESC off.

jam 11/03/15
ir/jxs
updt jxs 04/03/17

Resources
See Tower Catalog page 79.
Easy RC: Cars & Trucks
Review #1
Review #2
Review #3
Review #4
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info