Multiplex Solius Glider Kit 85"

Tower Stock# LXDHYA  •  Manufacturer Stock# M214264
Multiplex Solius Glider Kit 85
Money Saving Combos
 
LZ1523
Notes from our tech department:
This is the radio controlled, electric powered, Multiplex Solius Glider Kit.

FEATURES

Construction: Elapor foam, white in color with orange and gray
accents
Wings: Two-piece
Aileron Control Dual servo
Propeller: Plastic, 12x6 folding design
Spinner: White plastic 2.2" (55mm)
Landing Gear: Single plastic wheel 1.7" (44mm)
Canopy: Clear plastic

INCLUDES

RR Multiplex Solius Glider with Prop, Spinner and Instruction Manual

REQUIREMENTS

Radio: 6-channel with receiver
Servos: Four nano (1-elevator, 1-rudder, 2-aileron)
16" (40cm) Servo Extensions: Two for ailerons
24" (60cm) Servo Extensions: Two for elevator and rudder
Motor: Brushless BL-O 3516-0850 (not carried) Multiplex makes a
Power set for the Solius #33 2660 (not carried) that includes the
BL-O 3516-0850 Motor, 40A ESC, 12x6 Prop, Hub, Spinner, and
accessories
Electronic Speed Control: 40A with BEC
Battery: 3S 11.1V, (The Multiplex #15 7351 battery is recommended
but not carried by us. The FlightPower Eon-X Lite 2100mAh 3S 11.1V
(FPWP4196) is compatible. The ESC battery connector must be changed
to a Dean's Ultra Male (WSDM1302) to mate with this battery.)
Battery Charger: Compatible with selected battery
LiPo charging bag
Building and field equipment

SPECIFICATIONS

Wingspan: (2160mm)
Overall Length: (1100mm)
Total Weight: 44oz (1250g) minimum, built as glider
Total Weight: 51oz (1450g) minimum, electric powered
Wing Area: 630 sq in (40.7 sq dm)
Wing Loading: min 10.6 / 11.7 oz/sq ft
(30.7 / 35.7 g/sq dm)
Airfoil: Flat bottom
Center of Gravity: 2.7" (70mm) aft of the wing root leading edge
measured at the fuselage

Control Throws-
Elevator: Up 0.39" (10mm), Down 0.39" (10mm)
Rudder: Right to Left 0.98" (25mm)
Ailerons: Up 0.59" (15mm), Down 0.31" (8mm)
Spoilers: Both ailerons up 0.59" (15mm)
Spoiler Mixer (elevator trim compensation) 0.079" (2mm)

COMMENTS

This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the
manufacturer.

jxs 05/03/13
ir/jxs

Resources
Know Before You Fly
Easy RC: Sailplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info