Tamiya 1/12 Mazda 787B No.18 LeMans 24 Hours 1991 Kit

Tower Stock# LXCZST  •  Manufacturer Stock# 58555
Tamiya 1/12 Mazda 787B No.18 LeMans 24 Hours 1991 Kit (large view)
Notes from our tech department:
This is the electric powered, radio controlled, 1/12 scale
Mazda 787B No.18 On-Road Race Car Kit.


Chassis: RM-01 0.098" (2.5mm) thick FRP lower deck
Drive: Rear wheel direct, steel rear axle
Motor: 380 size brushed (540 motor, not included, can be installed
with the removal of motor plate adapter)
Front Suspension: Independent design with optimized kingpin trail
for increased stability
Rear Suspension: Pivot-Ball Link Rear (PBLR) with center pivot ball
pitch damper to control chassis pitch, roll damper and side links
to control chassis roll
Differential: Ball type
Wheels: White plastic 1.4" (36.2mm) diameter, front 0.94" (24mm) wide
rear, 1.4" (35.5mm) wide, hex hub type and 3-screw wheels can be
used with this chassis
Tires: High grip sponge design 1.9 (47.5mm) outer diameter, front
0.98" (25mm) wide, rear 1.2" (32mm) wide
Body: Clear untrimmed polycarbonate plastic with white plastic
helmeted driver head
Spur Gear: Plastic 63T 06 module


Mazda 787 No. 18 On-Road Race Car Kit, Tires, Wheels, Body, Decals
14T Pinion Gear and Instruction Manual


Radio: 2-channel with standard size steering servo
Battery: 2S 7.4V LiPo (#55105 6.6V LiFe battery recommended by
Tamiya not available in USA)
ESC: Compatible with included motor
Battery Charger: LiPo compatible
Polycarbonate safe spray or brush on paint
Building and track equipment


Wheelbase: 7.9" (201mm)
Length: 12.1" (308mm)
Width: 6.8" (174mm)
Height: 2.8" (71mm)


To replace Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 6x12mm Ball Diff 1 DTXC1569
1 6x10mm Ball Diff 1 DTXC1561
1 5x11mm Ball Diff 1 DTXC1547
2 6x10mm Rear Wheels 1 DTXC1561
4 5x11mm Front Wheels 1 DTXC1547

jxs 01/30/13

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info