HPI Racing 1/10 Sprint 2 Sport RTR w/'69 Mustang RTR-X

Tower Stock# LXCZRF  •  Manufacturer Stock# 109299
  • front/side (see larger view)
  • top (see larger view)
  • packaging (see larger view)
Notes from our tech department:
This is the 1/10 scale electric powered, 2.4GHz radio controlled,
ready to run HPI 1969 Ford Mustang Sprint 2 Sport Drift Car.


Chassis: Composite plastic
Drive: Four wheel belt with alloy steel dog bones
Motor: 15T with orange anodized aluminum motor mount, and 23T 48P
steel pinion gear
Radio: 2.4GHz radio with waterproof SF-10W steering servo
ESC: HPI SC15WP LiPo compatible waterproof and reversible
Battery: 7.2V NiMH 2000mAh with Standard connector
Battery Charger: 110V wall type
Spur Gear: 48P 90T composite
Body: Trimmed and painted highly detailed licensed 1969 Ford Mustang
replica with adjustable height body mounts that allow a variety of
bodies to be used
Differential: Planetary gear type with sealed case
Ball Bearings: Full set
Wheels: Two sets of 5-Spoke, two tone green with 12mm hex, 1.02"
(26mm) wide, 2.00" (51mm) diameter
Tires X-pattern radial touring mounted tires with extra set of T-
drift tires
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel rotating faster than the outer front wheel during
Bumper: Front foam
Warranty: Two year limited warranty through HPI beginning at date of
purchase. Warranty valid only in the U.S., Canada and South America


RTR HPI 1969 Ford Mustang Sprint 2, 2.4GHz Radio, 15T Brushed Motor
Touring Tires, Drift Tires, Eight Wheels, ESC, four AA Batteries,
Wall Charger, and Instructions


Track equipment


Length: 17"(431mm)
Width: 7.5"-8.0"(190mm to 200mm)adjustable using offset wheels
Height: 5"(127mm)
Wheelbase: 10"(254mm)
Length: 17.4" (441mm)
Width: 7.5" (190mm)
Height: 4.1" (105mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Front Axle 2 DTXC1535
4 5x10mm Rear Axle 2 DTXC1535
2 4x8mm Steering 1 DTXC1511
2 10x15mm Differential 1 DTXC1595
1 4x8mm Spur Gear Mount 1 DTXC1511

jxs 12/12/12

Easy RC: Cars & Trucks
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info