TrakPower LiPo 2S 7.4V 3250mAh 90C Hard Case 4mm

Tower Stock# TKPC0607  •  Manufacturer Stock# TKPC0607
TrakPower LiPo 2S 7.4V 3250mAh 90C Hard Case 4mm (large view)
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the TrakPower 2S 7.4V 90C 3250mAh Hard Case LiPo Battery.


Ideal for 1/10 and 1/12 scale on-road applications
ROAR approved
Hard plastic case for protection against the elements and crash
4mm female bullet connectors for positive (+) and negative (-)
2mm terminal for balancing
Male connectors to solder to wire leads


2S 7.4V 90C 3250mAh LiPo Battery
Two 4mm Male Bullet Connectors
One 2mm Balance Connector
Instruction Sheet


LiPo compatible charger with balancer such as the TrakPower VR-1


Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V
Capacity: 3250mAh
Max Recommended Charge Current: 1C (3.3A)
Continuous Discharge: 90C (297 amps)
Pack Dimensions: 1.8 x 0.73 x 3.7" (47 x 18.5 x 93.5mm)
Weight: 5.4oz (153g)
Watt Hours: 24Wh
Discharge Connectors: 4mm Bullet
Balance Connector: 2mm Bullet


ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts

jxs 12/31/13

Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info