Tekin 1/8 RX8 Gen3 4038 T8 Gen2 Motor 2.5D 1700kV Combo

Tower Stock# TEKC2482  •  Manufacturer Stock# TT2482
  • front/side (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Easy Pay
Request 3 Payments ($106.67, $106.66, $106.66) Details
Notes from our tech department:
This is the Tekin RX8 Gen 3 Dual Drive Mode Brushless Electronic Speed Control
and the Redline T8 Gen 2 1700Kv Sensored Brushless Motor.


RX8 Gen 3 ESC;
Ideal for 1/8 scale four wheel drive buggies, truggies, monster
trucks, touring cars, GT and dirt ovals, and 1/10 scale 4WD short
course trucks and rock crawlers
D2: Dual Drive Mode Technology-compatible with sensored and
sensorless motors
Sensor plug for precise commutation with all motors
QuickTune programming and one-touch radio calibration
Programmable High Voltage BEC (6.0v / 7.4v @ 8amps)
New adjustable throttle and brake frequencies, and adjustable torque
Datalogging capability, Hotwire 2.0 Interface TEKM1451, and
adapter, TEKM3825 required
EZ Access HotWire Programming Port
On-board temperature indicator
HD gold-plated solder posts for easy soldering
DGF2: Digital Glitch Filtering V2

Redline T8 Gen 2 1700Kv Sensored Brushless Motor:
Designed for 1/8 scale truggies
CNC machined 6061 T6 billet aluminum ribbed heatsink can
ROAR approved
Sensored and sensorless operation
Dual plug sensor wire harness
Four pole neodymium sintered magnet
ABEC5 precision high-speed oversize bearings
Rebuildable design
High current solder tabs
Solderless sensor PCB replacement
180 limited warranty through Tekin on both components beginning
at date of purchase


RX8 Gen 3 Dual Drive Mode Brushless ESC, TEKM2302
Redline T8 Gen 2 1700Kv Sensored Brushless Motor, TEKC2358


Battery connector of modeler's choice


Controls: Fwd/Brk or Fwd/Brk/Rev
Input: 2-6S LiPo (7.4-22.2V)
Motor Limits: Brushless-varies by voltage
Brushed Fwd Mode, Brushed Fwd/Rev Mode-No Limit
Max Current: 300 amps per phase
Burst Current: 1000 amps per phase
Timing Profiles: 7 choices (on board)
Modes: FWD Only / FWD-REV / FWD-REV Delay
Programmable BEC: 6.0v / 7.4v @ 8amps
Dimensions: 1.5 x 2.2 x 1.4" (38 x 55.8 x 35.5mm)
Weight: 2.7oz (76.5g)
Motor Length: 2.71" (69mm)
Motor Diameter: 1.57" (40mm)
Shaft Dimensions: 19x5mm
Weight: 11oz (311g)
Voltage: 4S-5S
Kv: 1700
Rotor: 18.5mm

jxs 05/01/17

Manufacturer Mailing Address
Additional Manufacturer Contact Info