Associated 1/8 RC8T3 Team Nitro Truggy 4WD Kit

Tower Stock# LW5109  •  Manufacturer Stock# 80917
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
Notes from our tech department:
This is the Radio Controlled, Glow Powered, 1/8 scale
Off-Road RC8T3 Competition Truggy Kit from Team Associated.

FEATURES

Chassis: 0.12" (3mm) thick 7075-T6 hard-anodized aluminum, with
optimized weight bias layout for improved handling and stability
Drive: Four wheel shaft with six universal driveshafts
Differentials: New V2 geared design for longer life, fast access for
quick removal and tuning
Gearboxes: 4.6:1 internal ratio
Body: Pro-Line RC8T3 clear body, Team Associated rear wing molded in
black
Shocks: 7076-T6 aluminum bodied 16mm Big Bore threaded with TiN
coated 3.5mm diameter shafts, larger diameter springs, and
optimized bladders for more precise volume compensation
Shock Towers: 7076-T6 aluminum, 0.197" (5mm) thick front tower,
0.157" (4mm) thick rear tower
Front Suspension: Pillow ball uprights for increased adjustability
and durability
Rear Suspension: Refined geometry with lower hinge pin inserts for
quick and easy roll center adjustments
Engine Mount: Two-piece aluminum, sliding design for easy gear mesh
adjustment and engine removal
Brake: Bonded pads and machined steel rotors
Clutch: 3 shoe metal, 13 tooth steel clutch bell
Spur Gear: 46 tooth
Fuel Tank: Molded plastic construction with splash guard

INCLUDES

RC8T3 Truggy Kit with Clear Body, Fuel Tank, Shocks, Decals
Shock Oil, Diff Oil, Air Filter and Instruction Manual

REQUIREMENTS

Radio: 2-channel with high torque steering servo
Engine: .21 cu in rear exhaust
Receiver Pack: 4.8 - 7.4V flat, LiPo, LiFe or NiMH
Wheels: 1/8 scale truggy
Tires: 1/8 scale truggy
Fuel: Model car blend, 30% nitro recommended
Glow starter, fuel bottle, starter box, tools and track equipment

SPECIFICATIONS

Vehicle;
Length: 22" (560mm)
Width: Varies
Weight: Varies
Wheelbase: 14.8 - 15.01" (376.5 - 381.5mm)
Body;
Length: 16.2" (412mm)
Width: 7.5" (190mm) at widest point
Height: 3.6" (91mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16mm Fr Diff 1 DTXC1585
2 8x16mm Ctr Diff 1 DTXC1585
2 8x16mm R Diff 1 DTXC1585
4 6x10mm Steering 2 DTXC1561
4 5x8mm Steering 2 DTXC1523
2 6x12mm Fr Gearbox 1 DTXC1569
2 6x12mm Rear Gearbox 1 DTXC1569
4 8x16mm flanged Fr Uprights 2 ASCC1565
4 8x16mm flanged R Uprights 2 ASCC1565
2 5x10mm Clutch 1 DTXC1535

jxs 04/22/16
ir/jxs

Resources
See Tower Catalog page 83.
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info