Multiplex Rockstar Kit 41"

Tower Stock# MPUA4278  •  Manufacturer Stock# M214278
Multiplex Rockstar Kit 41
Money Saving Combos
Money Saving Combos
Notes from our tech department:
This is the Multiplex Radio Controlled, Electric Powered,
Rockstar 3D Airplane Kit.


Construction: Elapor foam with M frame technology, internal plywood
frame in fuselage
Wings: One-piece Elapor foam, GRP (glass reinforced plastic) spar for
top wing, quick release retainers
Tailplane and Fin: Detachable
Landing Gear: Main, prebent aluminum, two-piece foam wheel pants
Wheels: Foam, main 3" (76mm) diameter, 1" (25.4mm) diameter tailwheel
Motor Mount: Anodized aluminum, red in color, 2.4" (60mm) standoffs
Canopy: Molded plastic with smoke tint
detailed cockpit and pilot bust
Spinner: 2.4" (62mm) diameter chrome plated plastic
Propeller: 14x7 injection molded plastic, gray in color


Wing, Fuselage and Tail Assemblies, Landing Gear, Motor Mount, Prop
Helmeted Pilot Figure, Pushrods, Hardware and Instruction Manual


Radio: 6-channel
Servos: Four micro metal gear
6" (152mm) Servo Extension: For ailerons
Brushless Motor: Multiplex makes a power set #33-2667 (not carried)
that includes an ESC and motor designed for this kit
LiPo Battery: 14.8V (4S) at least 2600mAh
Battery Charger: Compatible with selected battery
Charging bag and field equipment


Wingspan: 41" (1050mm)
Length: 42" (1060mm)
Weight: 60oz (1800g)
Center of Gravity (CG): 3.9" (100mm) back from the leading edge of
the top wing measured at the fuselage
Control Throws-
Elevator, Up & Down: 1.6" (40mm) 70% EXPO
Rudder, Right & Left: 1.6" (40mm) 60% EXPO
Ailerons, Up & Down: 0.67" (17mm) 40% EXPO


This model is NOT made of styrofoam and it is not possible to glue
Elapor foam using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the

jxs 09/15/15

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info