Phoenix Model 1/4 Stuka Ju 87 GP/EP/Gas ARF 75.2"

Tower Stock# PMMA0380  •  Manufacturer Stock# PH149
  • front/side (see larger view)
  • out of package (see larger view)
Money Saving Combos
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric, Gasoline, or Glow Powered, 1/4 scale
Almost Ready to Fly Phoenix Model Stuka Ju87 1.20/20cc Scale Airplane.
For Intermediate Modeler/Fliers.


Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron Control: Dual servo
Flap Control: Dual servo per wing (four total)
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Cowling: Pre-painted Fiberglass
Canopy: Dual design, clear with painted-on frame lines
Landing Gear: Aluminum shock absorbing strut type, prebent spring
wire tail gear
Wheels: Two 4.25" (108mm) rubber main, one 1" (25mm) tail wheel
Wheel Pants: Painted plastic
Fuel Tank w/pre-assembled stopper, approximately 24oz (720cc)
Spinner: Plastic construction black in color, 3.5" (90mm) diameter
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty beginning at date of


Wheels, Fuel Tank, Decals, Spinner, Instrument Panel,
Pilot, Instruction Manual and


For Glow Operation;
Engine: 1.20 2-stroke, or 1.40 4-stroke

For Gasoline Operation;
Engine: 20cc

For Electric Operation;
Brushless Motor: 1600-2200W
ESC: 120-160A
LiPo Battery: 5S-6S, 5500 - 6000mAh

Radio: 6-channel
Servos: Nine standard high-torque 2-aileron; 2-elevator; 4-flap
1-rudder (1-throttle if using gasoline or glow engine)
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 1200-2000mAh NiMH
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.


Wingspan: 75.2" (1910mm)
Weight: 10.8 - 11.9lb (4.9 - 5.4kg)
Length: 60" (1522mm)
Wing Area: 936 sq in (60.4 sq dm)
Wing Loading: 26.54 oz sq/in (81 g sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 4.4" (111mm) Back from the wing's leading edge
measured at the fuselage
Control Throws- Low Rate High Rate
Elevator: 0.43" (11mm) 12% expo 0.51" (13mm) 10% expo
Rudder: 1.2" (30mm) 15% expo 1.8" (45mm) 15% expo
Ailerons: 0.43" (11mm) 10% expo 0.51" (13mm) 10% expo

jxs 12/31/15

Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Industry Review #2
Manufacturer Mailing Address
Additional Manufacturer Contact Info