Phoenix Model 1:4 3/4 P-40 Warhawk 30-35cc Gas/EP ARF

Tower Stock# LXGBMR  •  Manufacturer Stock# PH159
Phoenix Model 1:4 3/4 P-40 Warhawk 30-35cc Gas/EP ARF (large view)
Money Saving Combos
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Gasoline or Glow Powered,
30cc/EP scale 1:4 3/4 Almost Ready to Fly P-40 Warhawk Airplane.
For Intermediate Level Pilots.


Construction: Laser cut balsa and plywood
Wing: Two piece
Aileron and Flap Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Painted fiberglass
Landing Gear: Air retracts with CNC machined suspension metal struts
tail gear, prebent wire
Spinner: 4.7" (120mm) diameter red plastic
Fuel Tank: Approximately 16oz (473cc)
Motor Mount: Three plywood plates with aluminum standoffs
Engine Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty


Pre-built Wing, Fuselage and Tail Sections, Retractable Landing Gear,
Spinner, Fuel Tank, Motor Mount, Engine Mount, Pilot Bust and
Instruction Manual


Radio: 8-channel minimum
Servos: Nine standard size high torque, 2-aileron, 2-elevator,
2-flap, 1-rudder, 1-throttle, 1-air valve control
Receiver Battery: 6V 2400-2600mAh NiMH
For Electric Control;
Motor: Brushless outrunner, Rimfire 1.60 recommended
Electronic Speed Control: 120-160A
LiPo Battery: 12S 5000-6000mAh
For Gasoline Power;
Engine: 30/35cc gasoline engine
Prop for glow engine or motor, field and maintenance equipment
Building and field equipment


Wingspan: 80.3" (2040mm)
Length: 70.7" (1797mm)
Flying Weight: 14.5 - 16.5lbs (6600 - 7500g)
Wing Area: 1176 sq in (76 sq dm)
Wing Loading: 31.13 oz/sq ft (95g/sq dm)
Wing Type: Naca airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 4.7" (120mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.51" (13mm) 10% expo 0.59" (15mm) 10% expo
Elevator, up/down: 0.51" (13mm) 12% expo 0.59" (15mm) 12% expo
Rudder, right/left: 1.2" (30mm) 15% expo 1.8" (45mm) 15% expo
Flap, Mid 0.59" (15mm) down, Landing 0.98" (25mm) down


If a replacement fuel tank is needed the DuBro 16oz Fuel Tank
DUBQ0216 can be used. Some trimming and modification may be
required when installing aftermarket fuel tank.

jxs 06/16/16

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info