Phoenix Model Yak 54 Mk2 GP/EP/Gas ARF 66.3"

Tower Stock# LXFTTH  •  Manufacturer Stock# PH148
Phoenix Model Yak 54 Mk2 GP/EP/Gas ARF 66.3
Money Saving Combos
Money Saving Combos
Notes from our tech department:
This is the Radio Controlled, Electric, Gasoline, or Glow Powered, 1/4 scale
Almost Ready to Fly Phoenix Model Yak 54 1.20/20cc Airplane.
Capable of both precise and extreme 3D aerobatics
For Intermediate Modeler/Fliers.


Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Cowling: Pre-painted Fiberglass
Canopy: Clear
Landing Gear:
prebent aluminum tail gear
Wheels: Two 4.25" (108mm) rubber main, one 1" (25mm) tail wheel
Fuel Tank w/pre-assembled stopper, approximately 24oz (720cc)
Spinner: Plastic construction red in color, 2.7" (70mm) diameter
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs

Warranty Period: 90 day limited warranty


ARF Super Cub PA-18 Airplane with Landing Gear, Wheels, Fuel Tank,
Decals, Spinner, Instrument Panel, Pilot, Instruction Manual and


For Glow Operation;
Engine: 1.20 2-stroke, or 1.40 4-stroke

For Gasoline Operation;
Engine: 20cc

For Electric Operation;
Brushless Motor: 1600-2000W
ESC: 120-160A
LiPo Battery: 5S-6S up to 5500 - 6000mAh

Radio: 6-channel
Servos: Six standard high-torque (2-aileron; 2-elevator;
1-rudder; 1 throttle)
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 1200-2000mAh NiMH
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.


Wingspan: 66.3" (1684mm)
Weight: 10.3 - 11.4lb (4700 - 5200g)
Length: 63.1" (1605mm)
Wing Area: 848 sq in (54.7 sq dm)
Wing Loading: 28.50 oz sq/in (87 g sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: Per updated information from the factory, the CG
range is 5.5 - 5.9" (140 -150mm) back from the wing's leading
edge measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.43" (11mm) 12% expo 0.51" (13mm) 12% expo
Rudder: 1.4" (35mm) 15% expo 2.4" (60mm) 15% expo
Ailerons: 0.43" (11mm) 10% expo 0.51" (13mm) 10% expo

jxs 12/31/15

Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info