Phoenix Model Tiger 3 GP/EP/Gas ARF 70.8"

Tower Stock# LXFNXF  •  Manufacturer Stock# PH066
  • Thumbnail 1 (see larger view)
  • Thumbnail 5 (see larger view)
Money Saving Combos
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric, Gasoline, or Glow Powered, 1/5 scale
Almost Ready to Fly Phoenix Model Tiger 3 Low Wing Sport Airplane.
For Intermediate Level Flyers.


Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron Control: Dual servo
Covering: High quality heat shrink
Radio Compartment: Plywood reinforced
Canopy: Clear
Landing Gear: Scale main gear, spring wire for tail gear
Wheels: Three 2.5" (63.5mm) diameter foam
Fuel Tank w/pre-assembled stopper, approximately 14oz (420cc)
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs
Spinner: Plastic red in color 2.7" (70mm) diameter
Warranty Period: 90 day limited warranty


ARF Phoenix Model Tiger 3 with Landing Gear, Wheels, Fuel Tank,
Instrument Panel, Pilot, Instruction Manual


For Glow Operation;
Engine: .61 - .91 2/stroke

For Gasoline Operation;
Engine: 15cc

For Electric Operation;
Brushless Motor: Rimfire 60
ESC: 60-100A
LiPo Battery: 6S up to 4000 - 5500mAh

Radio: 4-channel minimum
Servos: Six standard (2-aileron; 2-elevator; 1-rudder; 1 throttle)
Servo Extension: Two 12" (305mm) for aileron serrvos
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 800-1200mAh NiMH
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.


Wingspan: 70.8" (1800mm)
Weight: 8.1 - 9.2lb (3700 - 4200g)
Length: 63.2" (1605mm)
Wing Area: 864 sq in (55.8 sq dm)
Wing Loading: 24.58 oz-sq/in (75 g-sq/dm)
Wing Type: NACA Airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 3.3 - 3.5" (85 - 90mm) Back from the wing's
leading edge measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.31" (8mm) 12% expo 0.39" (10mm) 12% expo
Rudder: 0.98" (25mm) 15% expo 1.6" (40mm) 15% expo
Ailerons: 0.31" (8mm) 10% expo 0.35" (9mm) 10% expo

jxs 10/06/15

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info