Phoenix Model Sonic Mk2 Low-Wing .25-.32 GP/EP ARF 52.7

Tower Stock# LXEWXD  •  Manufacturer Stock# PH125
  • front/side (see larger view)
  • top (see larger view)
  • out of package (see larger view)
Money Saving Combos
 
LZ1610
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Glow or Electric Powered,
Almost Ready to Fly Sonic Low Wing Mk2 Airplane from Phoenix Model.
Ideal second airplane for intermediate flyers.

**Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES

Construction: Balsa and ply
Wings: Two-piece with NACA airfoil, aluminum wing joiner,
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Landing Gear: Tricycle type, prebent wire with --" (--mm) diameter
wheels
Spinner: Plastic 2.1" (53mm) diameter
Fuel Tank: oz ( cc) approximate
Engine Mount: Two-piece composite
Motor Mount: Plywood

INCLUDES

ARF Sonic Low Wing Mk2, Tricycle Landing Gear, Wheels, Engine Mount
Motor Mount, Fuel Tank and Instruction Manual

REQUIREMENTS

Radio: 4-channel minimum
Servo: 5 standard,: 2-aileron; 1-elevator; 1-rudder;
1-throttle (if using glow engine)
Receiver Battery: 4.8-6V / 800-1200mAh NiMH
For electric power;
Brushless Motor: Rimfire .32
ESC: 30-40A, to match selected motor
LiPo Battery: 3S, at least 2000mAh
Battery Charger: Compatible with selected battery
LiPo charging bag, propeller, field equipment
Glow Power;
Engine: .25-.32 cu in 2-stroke
Propeller: For selected engine
Glow fuel, glow starter, field equipment

SPECIFICATIONS

Wingspan: 52.7" (1340mm)
Length: 40.9" (1040mm)
Flying Weight: 3.9 - 4.4lbs (1800 - 2000g)
Wing Area: 418 sq in (27 sq dm)
Wing Loading: 25.9oz/sq ft (79g/sq dm)
Wing Type:
Configuration: Low wing
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 2.5 -2.7" (65 - 70mm) back from the leading
edge of the wing measured at the fuselage
Control Throws- Low High
Ailerons: 0.31" (8mm) 10% Expo 0.39" (10mm) 10% Expo
Elevator: 0.31" (8mm) 12% Expo 0.39" (10mm) 12% Expo
Rudder: 0.98 (25mm) 15% Expo 1.6" (40mm) 15% Expo

COMMENTS


jxs 03/19/15

Resources
See Tower Catalog page 30.
Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info