Tamiya 1/10 TA07 MS Chassis 4WD Kit

Tower Stock# LC5027  •  Manufacturer Stock# TAM42326
Easy Pay
Request 3 Payments ($227.98, $227.96, $227.96) Details
Money Saving Combos
Notes from our tech department:


Chassis: 0.09" (2.25mm) thick carbon fiber lower deck with a 2mm
thick dual bridge type vertical frame
Drive: Four wheel, dual belt, belts and differentials mounted
approximately 2mm lower than standard TA-07 Pro/R for greater
traction under acceleration
Center Pulley: New 20T center pulley ensures minimal belt tension
and a smooth drive
Motor Mount: Three position adjustable to a total range of 2.04"
Differentials: Oil-filled, TRF419 gear type
Shocks: Aluminum body oil-filled TRF super short big bore
Suspension: Tamiya TRF419XR setup with ball bearing equipped sway bar
mounting system
Front Bumper: Urethane foam
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Tamiya TA07 MS Chassis Kit with Instruction Manual


Radio: 2-channel
Steering Servo: High-speed standard size
Brushless Motor and ESC
Battery: 2-S 7.4 LiPo with connector compatible with selected ESC
Battery Charger: To match selected battery
Tires: Medium narrow, 24mm wide
Tire Inserts: Medium narrow
Body: 190mm
Building & track equipment, polycarbonate paint


Length: 14.6" (370mm)
Width: 7.4" (187mm)
Wheelbase: 10.1" (257mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 3x6mm R Suspension Arm Anchor 1 DTXC1503
1 4x8mm Spur Gear 1 DTXC1511
1 4x8mm flanged Spur Gear 1 DTXC1517
2 4x8mm Gearbox 1 DTXC1511
2 3x7mm Gearbox 1 DTXC1506
4 10x15mm Diffs 2 DTXC1595
4 5x8mm Diffs 2 DTXC1523
2 5x8mm Steering 1 DTXC1523
2 3x6mm Steering 1 DTXC1503
2 5x10mm Front Axles 1 DTXC1535
2 5x10mm Rear Axles 1 DTXC1535

jxs 12/14/18



Manufacturer Contact Information