Novak Mongoose Micro Brushless System

NEW Item!...NEW Item!...NEW Item!...
Novak Mongoose Micro Brushless System

Made for micros, but packed with power, the Mongoose Micro Brushless System combines a Three-90 Micro Pro brushless motor with a Mongoose Micro ESC to create the mightiest micro brushless system around! It’s lightweight, sensored design helps you maneuver at high speeds in tight spaces, all with unsurpassed braking control!

Mongoose Micro ESC Features

Specially designed for micro vehicles
One-touch on-board programming with 4 status LEDs
Adjustable parameters include minimum brake, drag brake, dead band and drive frequency (in brushed mode)
Built-in 2S and 3S LiPo Cut-off circuitry
Gold-plated PCB direct solder wiring tabs
Plug-in input harness and user-replaceable switch harness
Replaceable power trans-cap module
Water-resistant case
Factory-installed heat sink
Thermal overload protection
Radio Priority Circuitry
Polar Drive Circuitry
120-day warranty.

Three-80 Micro Pro Brushless Motor Features

Designed, hand-wound and dyno-tested by Novak
380 brushless motor specially designed for 1/16 – 1/18 scale micro vehicles
Sensor-based design for complete throttle control
High-performance nickel-plated Sintered Neodymium rotor for maximum acceleration, braking power and performance in high-temp conditions
Oversized rugged front bearing for increased handling and longer life
Multiple motor mount screw patterns
Lightweight ribbed aluminum end bells
Rebuildable design
Compatible with Novak Mod 0.6 pinion gears
Thermal Overload Protection (when paired with a Novak Mongoose Brushed/Brushless ESC)
Minimal maintenance
No cogging
120-day warranty.

Specifications

Mongoose Micro ESC Specs
FWD/REV/Brake – brushless mode; FWD/Brake – brushed mode
Input voltage: 2-3 cell LiPos or 4-9 cell NiMHs/NiCds (1.2V/cell)
On-Resistance: 0.0038 ohms/phase
Footprint: 1.15” x 0.95” (29 x 24.3 mm)
Weight: 0.77 oz. (21.7 g)
Rated & Braking Current: 40A/phase
Power wires: 16 gauge
BEC: 6V/2A
Motor limit: any Novak Micro brushless or any brushed 380. 2 mm motor plug connectors
Voltage cut-off: 6.25V (2S); 9.375V (3S) – w/LiPo cut-off circuitry enabled

Three-80 Micro Pro Brushless Motor Specs
Input voltage: 2-3 cell LiPos or 4-9 cell NiCds/NiMHs (1.2V/cell)
Watts: 210 (#3450); 165 (#3451) and 125 (#3452)
kV (unloaded): 9,000 (#3450); 7,300 (#3451) and 6,000 (#3452)
Motor size: 1.0” x 1.5” (26 mm x 37.7 mm)
Motor weight (with wires): 2.5 oz (72 g)
Shaft diameter: 1/8”