Tower Hobbies   NEW Item!...NEW Item!...NEW Item!...
Novak M2 Digital ESC/Terra Claw Motor Brushed System
One revolutionary, highly programmable package!
Novak M2 Digital ESC/Terra Claw Brushed System
Optimized for precise crawler control, the revolutionary M2 Digital ESC/Terra Claw Brushed System is as versatile as it is affordable. Includes two Terra Claw brushed motors with direct-solder wiring tabs and brass bushings. M2 ESC features five adjustable parameters, three fully programmable throttle profiles, a 5A/6V BEC and much, much more.

Motor Features   Motor Specifications
  • Specifically designed for R/C vehicles that require precise movement control
  • High number of turns for excellent torque and long run times
  • Direct-Solder Wiring Tabs for flexible soldering options
  • Equipped with brass bushings
  • Ultra-durable for many smooth and maintenance-free crawling sessions
  Number of turns: 55
Motor size: 1.96 in x 1.40 in (49.8 mm x 35.6 mm)
Motor weight: 5.8 oz (164 g)
Shaft diameter: 0.125 in (3.2 mm)
RPM: 8,000 @ 7V or kV of 1,140 rpm/volt
Power output: 22 watts @ 4,500 rpm
Efficiency peak: 67% @ 6,300 rpm torque: 588 gm/cm
 

ESC Features   ESC Specifications
  • Fully programmable, user-friendly interface with five adjustable parameters: Drag Brake (10 settings); Dead Band (5 settings); Minimum Drive (10 settings); Drive Frequency (10 settings) and Battery Type Selection (3 settings: NiMH, LiPo and LiFe)
  • Three fully programmable throttle profiles: Dig Mode, Proportional Dig Mode and Single Brushed Motor Mode
  • Applicable for dual brushed motor or single brushed motor applications
  • Independently powers the front or rear motors in a dual-motor crawler vehicle
  • Provides exceptional control on steep inclines and downhill descents
  • 5A/6V BEC
  • Thermal Overload Protection
  • 2-3 cell LiPo/LiFe-compatible using Novak’s auto-detect software
  • Built-in PC connection via Novalink™ interface offers additional programming features
  • Water-resistant case with gasket seal
  • 120-day manufacturer warranty
  ESC footprint: 1.16 in x 1.47 (29.5 mm x 37.3 mm)
Weight (without wires): 1.3 oz (36.9 g)
Input voltage: 4-9 cell NiMHs or 2-3 cell LiPos/LiFes
6V/5A BEC
Motor limit: 27T (2-cell LiPo); 33T (3-cell LiPo), 540-sized dual brushed motors
On-resistance (dual motor): 0.0016 Ohms @ 25°C trans. temperature
On-resistance (single motor): 0.0008 Ohms @ 25° trans. temperature
Status LEDs: 4 on-board; 2 external
Voltage Cut-Off (with LiPo Cut-Off Circuitry enabled): 6.25V (2-cell LiPo), 4.75V (2-cell LiFe), 9.75V (3-cell LiPo) & 7.125V (3-cell LiFe)
Power wires: 14G Super-Flex Copper-Strand Silicone Wire
 
M2 Digital ESC/Terra Claw Motor Brushed System
       LXYRZ8 ONLY       Buy Now Stock Status:

Add to
Wish List
Tech Notes
 

Prices shown were current at time of ad production and are subject to change.
Tower Hobbies Home Page Home
Tower Hobbies Shopping Cart Shopping
Cart
Tower Hobbies Your Account Your
Account
Tower Hobbies E-mail Newsletter Sign-up E-mail Newsletter
Tower Hobbies Wish ListWish
List

Copyright © 2009 - Tower Hobbies
All rights reserved. Do not duplicate or redistribute in any form.