Features
|
With Futaba’s innovative Dial-N-Key, just rotate the dial to find the desired program, press it to open the program and use the dial and cursor keys to set values. |
The 7C 2.4GHz FASST system comes with the R617FS receiver — compact enough for park flyers, yet powerful enough to control giant-scale models. |
Airplane Advanced Menu
- 3 programmable (P-Mix) mixes
- Flaperon
- Flap trim
- Air brake
- Elevator-to-flap mixing
- Flap-to-elevator mixing
- V-tail mixing
- Elevon mixing
- Aileron-to-rudder mixing
- Snap roll
- Dual elevator servo mixing
|
Helicopter Advanced Menu
- 3 P-mixes
- Throttle curve (5-point normal, idle up 1 & 2)
- Pitch curve (5-point normal, idle up 1 & 2)
- Revo mixing
- Gyro mixing
- Hovering throttle
- Hovering pitch
- Throttle hold
- Trim offset (aileron/elevator/rudder)
- 6 swash plate setups (5 CCPM options)
- Governor select
- Swash-to-throttle mixing
|
|
|
|
The 2.4GHz FASST advantage comes to the premier 7-channel sport system!
|
 |
Extra
Futaba R617FS Receiver (A $99.98
Value) only $10.00
when you purchase a Futaba 7C 7-Channel
2.4GHz FASST Computer Combo!
To receive
your extra receiver for only $10.00
you must use the COMBO BUY NOW button on this page. |
|
WOW! The performance features of a 9-channel, the programming ease of a 4-channel...PLUS spread spectrum technology!
Let intermediate-level modelers enjoy the kind of speed and accuracy formerly reserved for top-echelon pilots, with the value-packed 7C 2.4GHz FASST systems! Already acclaimed for its versatility, long list of functions and foolproof layout, the 7C now offers the incredible response and precision that only a 2.4GHz radio can provide!
7C System Specifics
- Software for airplanes and helis
- Mode 1-4 selectable (modes 3 and 4 available through transmitter software)
|
|
- Assignable switches/functions
- Large 72 x 32 LCD screen with adjustable contrast
|
7C System Overview
- 10-model memory
- 6-character model naming
- Digital trims, trim memory, EPA, sub trims and servo reversing on all channels
- Dual or triple rates* (aileron/elevator/rudder)
*with 3-position switch use
- Exponential (aileron/elevator/rudder/throttle)
- Adjustable throttle cut
- Fail-safe
|
|
- Trainer system (cord required)
- Flap switch
- Retract switch
- Variable rate knob (channel 6)
- Tx and Rx NiCds w/dual output charger
- Adjustable stick length and tension
- Software for Mode 1-4 control setups
- Count up/countdown timer
|
|
|
FASST spread spectrum technology multiplies the 7C’s advantages! |
Continuous Channel Shifting
Other 2.4GHz systems hold firm to one or two frequencies, increasing the potential for interference. The frequency of Futaba 2.4GHz FASST shifts hundreds of times per second, so there are no signal conflicts or interruptions – and no need for a frequency pin!
Dual Antenna Diversity
Futaba 2.4GHz FASST systems seamlessly select the best reception between two receiver antennas, so there's no loss of signal.
R603FF receiver included with 3PM 2.4GHz does not offer Dual Antenna Diversity. |
|
Easy-Link
Futaba 2.4GHz FASST system transmitters leave the factory with a unique and permanent ID code. Once linked to the receiver, the code ensures that the receiver will recognize and respond ONLY to that transmitter. The linking process is simple...just push a button on the receiver.
Pre-Vision
2.4GHz FASST scans incoming data and applies sophisticated error correction techniques – resulting in a system that gives you a solid, impenetrable connection with your model. |
|
|
Home
Shopping
Your
Ordering
Wish